This page contain parts under Copyright 2000-2018 by team.No portion of this webpage may be reproduced in any form without providing visible HTML link to .įor other uses, see SATA (disambiguation).This articles use of external links may not follow Wikipedias policies or guidelines. These are usually Y-adapters that have the four-pin drive connector on the other end. If pulled down at the connector (as it is on most cable-style SATA power connectors), the drive spins up as soon as power is applied.Pins 1, 2, and 3 are optional as well, as evidenced by some adapter cables that connect the drives to older PSUs. Pin Signal Description PSU Color Wire 1 3.3VDC 3.3 V Power orange 2 3.3VDC 3.3 V Power orange 3 3.3VDC Enterexit Power Disable (PWDIS) mode (3.3 V Power, Pre-charge prior to SATA 3.3) orange 4 GND Ground black 5 GND Ground black 6 GND Ground black 7 5VDC 5 V Power, Pre-charge red 8 5VDC 5 V Power red 9 5VDC 5 V Power red 10 GND Ground black 11 Optional Staggered spinupactivity black 12 GND Ground black 13 12VDC 12 V Power, Pre-charge yellow 14 12VDC 12 V Power yellow 15 12VDC 12 V Power yellow Pins 3,7,13 are pre-charge.Pin 11 can be used for activity indication andor staggered spin-up.

The same physical connections are used on 3.5-inch and 2.5-inch notebook hard disks. One pin from each of the three voltages is also used for hotplugging. This is because the small pins cannot supply sufficient current for some devices. The seemingly large number of pins are used to supply three different voltages 3.3 V, 5 V, and 12 V.Each voltage is supplied by three pins ganged together (and 5 pins for ground). Molex 67581-0000 used for cable connector and Molex 67582-0000 used for terminals connector.The SATA standard specifies a power connector sharply differing from those used by PATA drives and many other computer components. Chipy Plugin Usb Software And Applications.

Chipy plugin usb driver